Remove a section
Remove a section cuts out an interior segment of your video and splices the remaining parts together. Requires Creator+ plan.
When to use it
- Cut out a stumble, a long pause, or a technical hiccup in the middle of a take
- Remove a segment that shouldn't be in the final video (a sponsor read you've already delivered separately, a wrong-take moment, etc.)
- Tighten up pacing by removing dead segments anywhere in the video
For trimming from the start or end only, Trim start/end is simpler.
How it works
Set the start and end points of the segment you want to remove. Long Play will:
- Keep everything before the start point
- Drop everything between start and end
- Keep everything after the end point
- Splice the two remaining parts together at the cut point
The test clip covers the cut point so you can check that the splice looks clean before approving.
No AI
Remove a section is a frame-accurate splice operation. No machine learning or AI is involved - the two segments are re-encoded and joined at the cut point you define.
Notes
- The splice is a hard cut - no transition is added. If you want a clean edit, find a cut point where the action matches well on both sides.
- Audio is spliced in sync with picture. Be aware that background noise or music may produce a noticeable jump at the cut point.
- Only one section can be removed per encode. To remove multiple sections, approve each removal in sequence.