Skip to content

Film Restoration

Film Restoration applies a combination of filters designed for archival or degraded footage: denoise, deflicker, deband, and sharpen. Each filter is independent - enable only the ones your footage needs. Requires Creator+ plan.

The four filters

Denoise

Removes grain, noise, and random pixel variation from the picture. Good for: - Film scans with heavy grain - VHS or analogue transfers with tape noise - Low-light footage from older or smaller-sensor cameras

Denoise uses a spatio-temporal filter that analyses motion between frames, so it avoids blurring moving subjects. Heavy grain may still be partially visible; the goal is reduction, not elimination.

Deflicker

Smooths out frame-by-frame brightness variation. Good for: - Film scans where the exposure varies slightly between frames, producing a pulsing or flickering look - Footage shot under fluorescent lighting at a shutter angle that produces subtle flicker - Transferred video from analogue sources with unstable sync

Deflicker averages brightness across a short window of frames to eliminate rapid variation.

Deband

Removes banding - the visible steps between colours in smooth gradients. Good for: - Old footage that was compressed at low bit rates - Footage with smooth gradients (sky, background fades) that show staircase-like colour transitions - 8-bit footage with large areas of near-uniform colour

Deband uses a dithered smoothing pass across colour boundaries to produce gradual transitions.

Sharpen

Adds subtle edge enhancement to footage that looks soft or slightly out of focus. Good for: - Film scans or analogue transfers that are slightly soft from the digitisation process - Footage that was encoded with aggressive noise reduction and lost edge detail

The sharpen filter uses an unsharp mask with conservative settings to avoid halos or noise amplification.

Combining filters

You can enable any combination of the four filters. A typical workflow for a film scan:

  • Enable Denoise (reduce grain) + Deflicker (stabilise exposure) + Sharpen (restore edge detail lost during scan)

For compressed archival video:

  • Enable Deband (clean up compression artefacts) + Denoise (reduce codec noise)

No AI

All four filters are traditional signal processing - denoise, deflicker, deband, and sharpen have been standard video processing tools for many years. There is no machine learning, no AI upscaling, and no AI inference of any kind. The output is deterministic and based entirely on the pixel data in your video.

Notes

  • Test before approving - the result depends heavily on the specific characteristics of your footage.
  • Sharpening after denoising is a common combination: denoise first softens the picture slightly, and sharpen can restore perceived crispness without amplifying noise.
  • Film Restoration is a video-only operation. For audio noise on archival footage, use Noise Reduction separately.

← Back to Video Fixes